Free visual inspection and a written scope of work before any mitigation begins - photos, moisture readings, and drying logs go in your claim file
The scope we write is the scope we bill. Anything new gets shown to you, in writing, before we touch it.
Before
After
Before
After
Before
AfterFast, Reliable Mold Remediation Across Long Island City
Mold remediation in Long Island City typically runs $1,800 – $6,500 depending on square footage, water category, and whether containment is required. Most jobs we handle in LIC are same-day response, with a written price before any work starts. If you’re seeing dark spots on drywall, smelling that musty odor in a converted factory loft, or dealing with a supply line that let go in a Hunters Point walk-up, call (940) 466-4354. A live person answers, we schedule a tech with a trackable arrival time, and you’re not stuck waiting on a callback.
We know Long Island City’s buildings because we work in them constantly. The converted industrial stock along Jackson Avenue, the riverside towers near Gantry Plaza State Park, the prewar walk-ups off Vernon Boulevard, the newer condo slabs in Court Square. Each one moves moisture differently. That local knowledge changes how we scope a mold job before we cut a single hole.
Why Wendell Water Damage Restoration Is Long Island City’s Preferred Mold Remediation Company
Long Island City homeowners and property managers call us because we answer. No phone tree, no voicemail, no “someone will get back to you.” Wendell Water Damage Restoration has been doing this since 2006, and every job runs under The Relay Standard: book in a tap, live arrival time, photo updates by text, price in writing, and a text invoice you pay from a link.
Our technicians show up background-checked and uniformed, with a live arrival time you can track, not a four-hour window. They run IICRC, RIA, and IFA-standard protocols using professional equipment from Dri-Eaz, Phoenix, XPOWER, B-Air, and Injectidry. That’s the same gear and the same standards used on large commercial loss sites. We bring that to your LIC apartment, condo, or brownstone.
Blake Sorensen leads our team, and he holds every job to two things: a written price before any work starts, and the 365-Day Done Right Promise. If it’s not done right, we make it right. That’s stated in writing on every single repair, not buried in fine print. Plus a free second visit if the repair fails. Long Island City deserves a remediation company that puts that in writing.
Mold Removal Service in Long Island City
Mold Removal Service in Long Island City means physically cutting out and bagging mold-contaminated drywall, insulation, or flooring, not spraying something over it and hoping. In LIC’s older converted industrial buildings, this almost always means containment first: sealing the affected room or cavity so spores don’t migrate through shared walls into neighboring units. That’s the part a lot of cheap bids skip, and it’s the part that matters most in a 12-unit walk-up.
Containment and bag-out
We set negative air pressure and plastic containment before disturbing any moldy material. Every bagged piece is sealed and removed through a controlled path. In tight multi-unit buildings near Court Square or Queensboro Plaza, that discipline keeps your neighbors from getting a problem they didn’t have.
Surface vs. substrate removal
Bleach wipes kill surface mold. They do not dry out saturated gypsum board behind a converted factory wall. In LIC we see a lot of DIY “cleanups” that come back in two weeks because the water source was never mapped and the wet substrate never cut. We cut to dry, solid material, then dry what remains with Dri-Eaz dehumidifiers and XPOWER air movers so re-bloom doesn’t get a head start.
Mold Remediation Services in Long Island City
Mold Remediation Services in Long Island City go beyond removal: we find the water source, map the moisture, dry the structure, treat the cavity, and verify the job is actually done. In a converted Hunters Point loft with tanked walls or a Ravenswood slab that wicks groundwater, skipping the moisture mapping is how you end up doing the same job twice.
Moisture mapping before demo
Before we cut anything, we run moisture readings across walls, floors, and ceiling cavities with thermal imaging and penetrating meters. We log every point, because those readings are what your insurance adjuster needs for the scope of work. And they tell us exactly how far to cut. Not a guess. A measurement.
Post-remediation verification
After drying and treatment are complete, we re-test moisture levels against dry standard. If the numbers don’t hold, we keep drying. If they do, we document it with photos and written readings. That’s the 365-Day Done Right Promise in practice: the job isn’t done when it looks done. It’s done when the readings say it’s done.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Long Island City
We deploy Dri-Eaz dehumidifiers, Phoenix axial fans, and XPOWER air movers on Long Island City jobs every week. These are the workhorses of professional restoration: built for sustained structural drying, not home-improvement-store dehumidifiers that can’t pull water out of a slab. We stock replacement filters, hoses, and fittings locally for LIC customers, which means faster turnaround when a piece of equipment needs a swap mid-dry. If you’re in a converted factory building on Jackson Avenue or a condo near the waterfront, the equipment matters. We bring commercial-grade gear because LIC’s buildings demand it.
Common Mold Remediation Problems We See in Long Island City Homes
- Category 2 and 3 water intrusion in old Ravenswood and Hunters Point slabs: Much of Long Island City’s housing stock sits on fill where the industrial shoreline once was, so basement and cellar slabs in 11101 wick groundwater differently than inland Queens blocks. That means gray and black water intrusion shows up way more often than clean-supply leaks, and that changes the entire remediation scope.
- Skipped containment in tight multi-unit buildings: Insurance-scoped jobs sometimes skip bag-out to save money. In a 12-unit walk-up near Vernon Boulevard, that lets spores migrate through shared wall cavities into neighboring units. We never skip containment on a shared-wall building.
- Bleach wipe-downs on saturated substrate: DIY bleach kills surface growth but leaves the wet drywall or insulation behind. In older Hunters Point industrial conversions, that hidden damp cavity re-blooms within days. You need the substrate cut and the cavity dried, not a surface cleaning.
- “It looks dry” inspections behind tanked and converted factory walls: LIC has a lot of brick-and-masonry buildings with converted interiors and vapor barriers against original walls. Moisture hides behind those barriers. Without penetrating-meter readings, you’re guessing. We measure, then decide what gets cut.
Pricing for Mold Remediation in Long Island City, NY
What actually drives cost in LIC: the water category (clean, gray, or black), whether containment is needed for shared walls, square footage of wet material, and how many days of structural drying it takes to hit dry standard. You get a written price before we touch anything. No surprises at the door. Call (940) 466-4354 for a free estimate, and we’ll put the number in writing.
We Also Serve Cities Near Long Island City
Wendell Water Damage Restoration serves the neighborhoods around Long Island City with the same same-day response and written pricing: Sunnyside, Woodside, Astoria, and Maspeth. If you’re in one of those neighborhoods and dealing with mold after a leak or groundwater intrusion, our Mold Remediation team can be there fast. For a full look at our local coverage, see Mold Remediation in Long Island City.
Serving Long Island City, NY - Our Local Coverage Area
We’re based in the Long Island City area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Mold Remediation in Long Island City
We respond same day in most of Long Island City, including 11101, 11109, and the Court Square area. A live person answers 24/7, we schedule a tech with a trackable arrival time, and you’re not waiting on a callback. Call (940) 466-4354 and you’ll get a real person and a real ETA.
Yes, and often more. In Long Island City’s multi-unit buildings, containment and bag-out are non-negotiable because spores travel through shared wall cavities. A landlord scoping a 12-unit walk-up near Vernon Boulevard needs the same written scope and moisture mapping as a homeowner, plus documentation your tenants and their insurance can review.
The water category tells us what’s in the water, not just how wet things are. Category 1 is clean supply water. Category 2 has contaminants. Category 3 is sewage or groundwater with pathogens. In Long Island City, where slab wicking in 11101 pulls up category 2 or 3 water far more often than inland blocks see, that usually means cutting and removing the drywall, not drying it in place. Call (940) 466-4354 and we’ll explain what category you’re dealing with based on the moisture readings and source.
Yes, and we always do. We run penetrating and thermal moisture mapping across walls, floors, and cavities before any demo starts. Those readings tell us exactly where the water went and how far the cut needs to go. They also become the documentation for your insurance scope of work. Written price, written readings, photo updates by text.
Yes. Post-remediation verification is standard on every Long Island City job. We re-test moisture levels against dry standard, document the readings, and only close out when the numbers hold. If they don’t, we keep drying. That’s the 365-Day Done Right Promise, and it’s in writing on every job.
If you’ve got mold in a Long Island City building and you want a real scope, a real price, and a tech who shows up when we say they will, call Wendell Water Damage Restoration at (940) 466-4354. We’ll answer, we’ll come out, and we’ll put the plan in writing before any work starts.
Written by Blake Sorensen, Owner at Wendell Water Damage Restoration, serving Long Island City since 2006.