Free visual inspection and a written scope of work before any mitigation begins - photos, moisture readings, and drying logs go in your claim file
The scope we write is the scope we bill. Anything new gets shown to you, in writing, before we touch it.
Before
After
Before
After
Before
AfterFast, Reliable Mold Remediation Across Medford
Mold remediation in Medford typically costs $1,800 to $6,200 for a finished basement job, and the work usually takes two to five days once containment is set. We get calls from homeowners along Patchogue Yaphank Road, around Tremont Avenue, and throughout the 11763 zip code who just found black staining behind a couch or smelled that musty odor after a nor’easter. Wendell Water Damage Restoration answers the phone with a live person, gives you a written price before anything gets torn out, and sends a background-checked technician with a live arrival time you can track. Call (940) 466-4354 and we’ll have someone on the way to Medford the same day.
Why Wendell Water Damage Restoration Is Medford’s Preferred Mold Remediation Company
Medford homeowners deal with a very specific mold problem: finished basements in 1960s and 1980s ranches that flood when the water table rises or a nor’easter blows through. That’s the call we get most often, and it’s the call we know how to handle. Our Mold Remediation team runs moisture mapping before touching a single wall, because surface readings alone miss the colonies hiding behind paper-faced drywall and paneling.
Blake Sorensen, who leads our crew, has seen enough of these jobs to know where mold hides in Medford homes: behind Bilco door wells, under basement staircases, inside closets built against masonry walls. We run Dri-Eaz and Phoenix dehumidifiers with XPOWER air movers inside proper containment, apply antimicrobial treatment where it’s needed, and document everything with before-and-after photos texted to your phone. No vague four-hour windows. No surprise price at the door. Just a written scope of work and a number that matches what you pay.
Black Mold Removal in Medford
Black Mold Removal in Medford usually runs $2,400 to $5,800 when the colony is behind finished basement walls, which is where we find it most often in this town. Stachybotrys, the mold people call “black mold,” thrives on the paper face of drywall that’s been wet for more than 48 hours. In Medford’s finished basements, that means the surface can look dry while the colony feeds inside the wall cavity.
Containment and Removal
Before we cut into any wall, we seal off the affected room with negative air pressure so spores don’t travel up the stairs into your kitchen or living room. Then we remove the affected drywall, insulation, and any porous material that can’t be cleaned. The goal is removing the food source, not just spraying the surface.
Post-Remediation Verification
After removal and drying, we run moisture and humidity readings to confirm the space is actually dry, not just surface-dry. We then apply antimicrobial treatment to the framing and masonry before new drywall goes back. You get photos and a written verification of the scope, so you know what was opened, what was removed, and why.
Mold Removal Contractor in Medford
A Mold Removal Contractor in Medford should understand the difference between a cleanup job and a water-event mold problem, because they’re not the same thing. We get calls where a homeowner wiped visible mold off a wall with bleach a month ago, and now their kid is coughing and the smell is back. Bleach doesn’t kill mold on porous surfaces. It just bleaches the color so you can’t see it for a while.
Source Identification
Every mold job starts with finding the moisture source. In Medford, that’s often a high water table pushing groundwater through a basement floor or a failed sump pump on the south side of the Long Island Expressway corridor. If we don’t fix the water, the mold comes back in eight weeks. We won’t just remove the mold; we’ll tell you why it grew and what needs to change.
Finished Basement Remediation
Finished basements in Medford are tricky because the drywall is often installed directly against concrete block. That means the paper backing is touching a cool, damp surface for decades. When floodwater climbs over the sill plate, that drywall wicks it up like a sponge. We remove it in clean sections, dry the masonry behind it, and set up containment so the rest of your house stays clean.
Trusted Brands We Service in Medford
We run Dri-Eaz, Phoenix, and XPOWER equipment on every Medford mold job, the same professional-grade brands used on large commercial loss sites. Because we stock filters, antimicrobials, and containment supplies in our New York City dispatch hub, we don’t have to wait on a parts order before starting your job. Our technicians show up with what they need, not with a promise to come back next week. For Medford homeowners, that means faster containment and a shorter timeline from first call to written scope.
Common Mold Remediation Problems We See in Medford Homes
- Finished basements with paper-faced drywall against masonry. Medford’s 1960s-to-1980s ranch and split-level homes often have basements finished directly against concrete block. The paper drywall backing stays damp, and mold grows behind the wall where you can’t see it until the smell gets bad.
- Nor’easter flooding through Bilco doors. When the South Shore drains toward Bellport Bay and a storm pushes water back, basements with exterior stairwells flood fast. That Category 3 water carries sewage and bacteria, and mold follows within 24 to 48 hours if the walls aren’t opened and dried properly.
- Surface moisture readings that look dry but aren’t. A standard moisture meter will often read dry on a painted wall while the cavity behind it is still wet. We see this constantly in Medford homes where homeowners were told their basement was “dried” after a flood, only to have mold bloom months later.
- Skipped containment leading to upstairs contamination. When remediation is done without sealing off the basement, spores travel through the stairwell and HVAC returns into the first floor. We’ve had Medford customers call us after a “remediation” that spread the problem instead of fixing it.
Pricing for Mold Remediation in Medford, NY
Here’s what you can expect to pay in Medford, based on the jobs we actually run here:
- Mold Inspection & Testing: $350 – $700, including moisture mapping and written findings
- Small visible mold removal (bathrooms, closets): $900 – $2,200
- Finished basement mold remediation: $1,800 – $6,200 depending on square footage and how many walls need opening
- Black mold behind drywall with full containment: $2,400 – $5,800
- Crawl space mold treatment: $1,400 – $3,800
- Air quality restoration and HVAC cleaning: $700 – $1,900
- Moisture and humidity control system installation: $1,500 – $4,500
These are honest ranges for Medford’s housing stock. The biggest variable is how far the mold has spread behind finished walls. We give you a written price before any work starts, so the number you approve is the number you pay. Call (940) 466-4354 for a free estimate.
We Also Serve Cities Near Medford
Our crews cover Medford and the surrounding South Shore communities regularly. If you’re in Holtsville, Farmingville, Yaphank, or Patchogue, we can usually reach you within 60 minutes of your call. Learn more about our full coverage on our Mold Remediation in Medford page, or call and we’ll confirm availability for your street.
Serving Medford, NY - Our Local Coverage Area
We’re based in the Medford area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Mold Remediation in Medford
Yes. Finished basements in Medford, especially in the 1960s-to-1980s ranches and split-levels common along the Patchogue River corridor, usually have paper-faced drywall installed directly against masonry. That creates a hidden mold environment behind walls that standard surface moisture meters miss. Remediation has to include wall opening, masonry drying, containment, and post-remediation verification, not just surface cleaning. Call (940) 466-4354 and we’ll assess your basement specifically.
Same day, in most cases. We answer the phone live, 24/7, and dispatch from our New York City office to Medford with a live arrival time you can track. A finished basement with visible mold or a recent flood should be contained quickly, because mold establishes in 24 to 48 hours and every day of delay expands the affected area.
Yes. When a nor’easter floods a Medford basement through Bilco doors or rising groundwater, that water is Category 3 by restoration standards. It carries bacteria, sewage, and contaminants from outside. That changes the remediation protocol: affected porous materials must be removed, not just dried. You can’t “dry out” a Category 3 flood with dehumidifiers alone. Call (940) 466-4354 and we’ll walk you through what needs to happen.
Yes. We document everything with photos, written moisture readings, and a clear scope of work that your adjuster can review. We hand you a dry, verified scope you can send to insurance the same day. We deal with adjusters directly when needed, and our documentation is built to insurance standards. You’ll know what’s covered and what isn’t before we put a tool on the wall.
We use Dri-Eaz, Phoenix, and XPOWER equipment on every Medford mold job. Dri-Eaz and Phoenix dehumidifiers pull moisture from the air and masonry; XPOWER air movers keep air circulating so surfaces release moisture faster. These are the same professional-grade brands used on commercial loss sites, not rental units from a hardware store. They’re deployed under IICRC, RIA, and IFA standards, and we track drying progress with psychrometric readings until the structure is verified dry.
Written by Blake Sorensen, Owner at Wendell Water Damage Restoration, serving Medford with water damage restoration and mold remediation since 2006.