Free visual inspection and a written scope of work before any mitigation begins - photos, moisture readings, and drying logs go in your claim file
The scope we write is the scope we bill. Anything new gets shown to you, in writing, before we touch it.
Before
After
Before
After
Before
AfterFast, Reliable Mold Remediation Across Bronx
Mold remediation in Bronx typically runs $2,100 to $6,800 for a full containment job on a pre-war apartment wall, and $450 to $1,200 for targeted removal around a leaking steam riser. We answer calls live at (940) 466-4354 and can often have a technician on-site the same day. Most Bronx mold problems we handle are not storm-related: they start as slow, hidden leaks inside 1920s to 1940s brick masonry buildings, where moisture travels through plaster and block long before you smell anything. That is why our crews start every Bronx job with moisture mapping, not just a visual check of the wall surface. If you suspect mold behind a wall or ceiling, call us first: the quicker we find the moisture source, the less drywall, plaster, and lath has to come out.
Why Wendell Water Damage Restoration Is Bronx’s Preferred Mold Remediation Company
Bronx clients call us because we do not make them wait through phone trees or vague four-hour arrival windows. Every call is answered by a live person, 24/7. When a technician is dispatched to your building near Fordham Road, Pelham Parkway, or the Grand Concourse, you get a live arrival time you can track, the same way you track a rideshare. Our technicians are background-checked and uniformed, so you know exactly who is walking into your apartment or co-op unit before they get there.
Wendell Water Damage Restoration was founded in 2006 and is part of the Relay Home Co. family. Each location is independently owned and operated to The Relay Visibility Guarantee. That guarantee means three things on every Bronx mold job: a written price before any work starts, a written 365-Day Done Right Promise, and a free second visit if the repair fails. We work to IICRC, RIA, and IFA standards and run professional equipment from Dri-Eaz, Phoenix, and XPOWER. Bronx building supers, landlords, co-op boards, and homeowners keep our number because we hand them a scope of work in writing before a single tool comes out of the van. That is how you avoid the overselling problem that plagues this trade, especially on mold jobs where fear drives costly over-demolition.
Black Mold Removal in Bronx
Black mold removal in Bronx almost always starts with finding the hidden moisture source inside a pre-war plaster or brick wall, and it typically costs $1,800 to $5,400 when we contain the affected room, run HEPA air scrubbers, and remove the colonized plaster and lath. Bronx homeowners call us when they see dark staining spreading across a bathroom ceiling, inside a bedroom closet, or along the baseboard of a radiator wall. The stain itself is rarely the whole problem: in this borough’s older brick buildings, the mold is usually feeding on moisture trapped behind the paint, inside the plaster keys, or against the backside of the drywall. Blake Sorensen, who leads our mold remediation work, insists every technician confirm the moisture source before opening a wall. That saves Bronx clients from paying for removal that will just grow back.
Containment and Air Scrubbing
We set up a sealed containment zone around the affected area, run HEPA-filtered air scrubbers to capture airborne spores, and keep negative air pressure so mold does not drift into the rest of the apartment. This matters in Bronx apartment buildings, where shared hallways and stacked units make cross-contamination a real risk. The process follows IICRC protocol and we log every air reading before and after.
Antimicrobial Treatment and Structural Drying
After removing the affected material, we apply an antimicrobial treatment to the remaining framing and surrounding surfaces. Then we place air movers and dehumidifiers, and we monitor the drying with moisture meters and psychrometric logs until the cavity reads dry, not just the surface. In pre-war Bronx buildings, this step is what separates a five-year fix from a one-year recurrence.
Mold Removal Contractor in Bronx
A mold removal contractor in Bronx needs to know the difference between a surface stain on sheetrock and mold that has colonized the backside of plaster and lath inside a 1930s steam-heated building, and that knowledge drives the $450 to $1,200 cost difference between a small targeted cut-out and a full wall removal. We are often called after a Bronx homeowner or landlord tries bleach and repainting, only to watch the stain return within weeks. That is because the steam riser pinhole, radiator valve drip, or cast-iron stack seepage behind the wall is still active. No amount of surface wiping fixes an active leak inside a plaster cavity.
Moisture Mapping Before Cutting
We use pinless moisture meters and thermal imaging to map exactly where the wet zone ends before we cut anything open. In pre-war brick buildings, moisture often travels horizontally through the block and plaster, far from the visible stain. Skipping this step is the most common mistake we see from other contractors in the Bronx. Cutting blind means either leaving mold behind or demolishing drywall that was fine, and both cost the property owner more money.
Repair vs. Full Tear-Out Decisions
Not every Bronx mold job requires gutting the room. When moisture mapping shows the mold has not spread past the cavity, we remove only the affected section, treat the framing, and leave the rest of the wall intact. We write the scope of work, share it with you before we start, and document everything with before-and-after photos sent by text. That documentation also makes insurance claims easier when a hidden steam riser leak is the cause.
Trusted Brands We Service in Bronx
Bronx landlords and homeowners often ask what equipment we run, because the wrong fans and the wrong drying strategy turn a $900 targeted mold removal into a $7,000 gut job. Our crews use Dri-Eaz dehumidifiers, Phoenix air movers, and XPOWER air scrubbers, the same professional-grade brands used on large commercial loss sites. We keep spare filters, HEPA bags, and moisture meters stocked for fast turnaround across the Bronx, so we are not waiting on a parts order when your tenant is complaining about a smell in the bedroom closet. The equipment matters less than the person running it, and our techs are trained to IFA, RIA, and IICRC standards before they step foot in a Bronx apartment building.
Common Mold Remediation Problems We See in Bronx Homes
Here are the four failure patterns we run into most often in this borough, and why they keep coming back:
- Steam riser pinhole leaks behind painted-over walls. In pre-war Bronx apartment buildings, steam risers run inside wall cavities, and pinhole leaks can go unnoticed for years. By the time a tenant smells the musty closet, the mold has already colonized the backside of the plaster.
- Radiator valve drips onto wood floors and through to the ceiling below. A slow drip at a valve body seems minor, but it keeps a section of flooring or ceiling sub-surface wet for months. Mold grows under the finish floor, and the first visible sign is often staining on the ceiling of the apartment below.
- Cast-iron stack seepage in bathroom walls. Older Bronx buildings still have cast-iron waste stacks, and the pipe joints eventually weep. That moisture stains the plaster from the inside out, and mold can spread behind tile before any tile is loose.
- Bleach wipes on plaster without fixing the source. We see this on tenant turnover jobs all over the borough. Bleach kills surface growth but does nothing to the moisture inside the wall cavity. The stain returns in weeks because the leak is still active behind the plaster.
Pricing for Mold Remediation in Bronx, NY
We Also Serve Cities Near Bronx
If you are just over the borough line, we regularly run crews to Astoria, College Point, East Elmhurst, and Jackson Heights. The housing stock changes fast once you cross the bridge, but the same steam riser, radiator, and pre-war plaster problems show up there too. For context on how our general process works across the metro area, see our Mold Remediation service page, and for borough-specific details, read about Mold Remediation in Bronx. We dispatch and schedule from our New York City office, and our crews serve the Bronx locally.
Serving Bronx, NY - Our Local Coverage Area
We’re based in the Bronx area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Mold Remediation in Bronx
We can usually have a technician on-site the same day you call, and often within a few hours for active water feeding the mold. A live person answers at (940) 466-4354 24/7, and once your job is booked you get a live arrival time you can track, not a four-hour window. When a tenant reports a smell or a landlord sees staining during turnover, speed matters because the moisture source is still active and the mold is spreading behind the wall while you wait. Call us and we will tell you over the phone whether it sounds like an emergency dispatch or a scheduled inspection. Either way, the estimate is free.
In the Bronx, most mold we remediate comes from slow, hidden plumbing leaks, not floods. Steam riser pinholes, radiator valve drips, and cast-iron stack seepage inside pre-war walls are the usual culprits. The leak may have been active for months or years before the mold is visible, because moisture in brick and plaster travels inward before it shows on the painted surface. Storm and sewer backups happen too, but they produce a different signature, one we treat with Category 3 protocol. If you smell mold but have not had a flood, suspect a hidden plumbing leak and call (940) 466-4354 for a moisture mapping inspection.
Yes, in many cases we remove only the affected section of plaster and lath, treat the framing, and leave the rest of the wall intact. The decision comes down to moisture mapping: if readings show the wet zone has not spread past the cavity, targeted removal works. We were called out to a third-floor apartment on the Grand Concourse near East 187th Street after a tenant noticed a musty smell in a bedroom closet, and moisture mapping found elevated readings behind a painted-over steam riser drip. We set containment, ran HEPA air scrubbers, removed the affected section, applied antimicrobial treatment, and ran air movers until drying logs showed the assembly back to pre-loss condition. The landlord chose targeted repair over a full demolition once the scope showed the mold had not spread past the cavity. Call us for an exact quote, the estimate is free.
Water category matters a lot: Category 1 is clean water, Category 2 is contaminated, and Category 3 is grossly unsanitary, such as sewage backup. In Bronx co-ops and rentals, we often see Category 2 or 3 losses treated as if they were clean, with wet porous materials dried in place instead of removed. That is a recipe for recurrence and a health risk for the tenant. Our technicians determine the water category before deciding what gets removed, what gets treated, and what gets dried. Sewage or prolonged gray water contact means saturated drywall and plaster come out, no exceptions. Call (940) 466-4354 and we will walk you through what category your situation is and what it means for the cleanup.
Yes. We work directly with landlords, co-op boards, property managers, and building supers across the Bronx, and we know the pressure points: tenant turnover deadlines, board approvals, insurance adjusters, and the need for written documentation. Every job includes a written scope before work starts, a written 365-Day Done Right Promise, and before-and-after photos sent by text, so you have a record for the board, the insurance carrier, and the tenant. We also coordinate directly with adjusters and provide photo documentation for claims. If you manage a building in the Bronx, keep (940) 466-4354 in your phone; we are the local crew that actually answers when you call.
Call Wendell Water Damage Restoration at (940) 466-4354 for a free mold remediation estimate in the Bronx. A live person answers 24/7. We will give you a written price before any work starts and a live arrival time you can track.
Written by Blake Sorensen, Owner at Wendell Water Damage Restoration, serving Bronx mold remediation with local crews and citywide dispatch.