Free visual inspection and a written scope of work before any mitigation begins - photos, moisture readings, and drying logs go in your claim file
The scope we write is the scope we bill. Anything new gets shown to you, in writing, before we touch it.
Before
After
Before
After
Before
AfterFast, Reliable Mold Remediation Across West Point
Mold remediation in West Point typically costs between $1,800 and $6,500 depending on how far moisture has traveled inside walls, and most jobs here take three to seven days once containment goes up. If you just found mold or smelled that musty odor in a closet, behind a bathroom vanity, or along a baseboard, call us at (940) 466-4354. We answer live, 24/7. West Point’s older housing stock means mold is rarely just what you can see on the surface, so we approach every job here with moisture mapping before any wall gets opened or treated.
Our crews understand West Point’s specific building types: the historic brick and granite structures near the academy, the mid-century quarters, and the split-level and raised-ranch homes throughout the area. That matters because a mold problem in a 1920s plaster-and-lath building behaves differently than one in a 1970s drywall home. We adjust containment, drying strategy, and demolition scope accordingly, and we put the price in writing before any work starts.
Key Takeaways:
- Most West Point mold jobs run $1,800 – $6,500; full-home remediation with multiple rooms can exceed $10,000.
- We arrive with a live ETA you can track, not a four-hour window.
- Every job includes written pricing up front, a 365-Day Done Right Promise in writing, and before-and-after photos by text.
- Mold in West Point homes is usually inside wall cavities and HVAC chases, not just on open surfaces. Surface-only treatment nearly always fails here.
Why Wendell Water Damage Restoration Is West Point’s Preferred Mold Remediation Company
Homeowners around West Point call us because we show up when we say we will and put the price in writing before any tool is touched. Wendell Water Damage Restoration has been doing this since 2006, and the way we run jobs hasn’t changed: background-checked, uniformed technicians, professional-grade equipment, and a live person on the phone at 3 a.m. if that’s when you discover the problem.
We work throughout the West Point area, including the neighborhoods around Route 9W, the Thayer Gate side of the academy, and the Highland Falls-adjacent streets where academy families and civilian staff live. Local customers regularly tell us two things: they appreciate that we explain what we’re doing in plain words, and they value the before-and-after photo updates we text as the job progresses. You should never have to wonder what happened behind a containment barrier. With us, you get documented proof.
West Point’s mix of historic buildings and postwar housing means moisture hides in places a quick walkthrough can miss. That’s why our lead techs run thermal imaging and moisture meters on every mold job here, even the ones that look small. You get a written scope, a price, and a drying plan that accounts for how your specific home is built. Blake Sorensen leads our team, and every job is held to the Relay Visibility Guarantee: you know who’s coming, when they’ll be there, and exactly what it costs.
Mold Remediation Services in West Point
Mold Remediation Services in West Point start with finding the moisture source, not just killing what’s visible. Our Mold Remediation process includes thermal imaging and moisture mapping, containment setup with negative air pressure, removal of contaminated porous materials like drywall and insulation, HEPA vacuuming, antimicrobial treatment, and drying verification with daily moisture logs. Most West Point jobs run $2,000 to $5,500, with smaller single-wall projects sometimes landing near $1,800 and multi-room or crawl space jobs pushing $8,000 or more.
Moisture Mapping and Source Removal
Here’s the thing about West Point homes: that 18-inch patch of mold on your hallway ceiling usually means water traveled much farther than the stain. In plaster and lath buildings especially, water follows framing and settles inside wall cavities. We map moisture before cutting anything, find the actual source, and only demo what’s wet and contaminated. No guesswork, no opening more wall than necessary.
Containment and Air Filtration
We build containment barriers and run HEPA-filtered negative air machines to keep spores from moving into unaffected rooms. In West Point’s tighter older homes with shared duct runs and HVAC chases, this step is non-negotiable. Skipping it is how a “small” mold job turns into a whole-house re-contamination problem two months later.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Professional Mold Removal in West Point
Professional Mold Removal in West Point is never just spray-and-wipe. The service involves cutting out and disposing of contaminated drywall, plaster, or insulation, treating remaining framing with antimicrobial agents, and verifying with moisture readings that the cavity is truly dry before any rebuild. For a typical single-room job in West Point, expect to pay $1,800 to $4,200. Crawl space jobs here run $3,000 to $7,500 because access is often tight under older homes, and the humidity problem has usually been building for years.
Plaster and Lath Remediation
West Point’s historic homes with original plaster walls need a different approach. Plaster is dense and holds moisture longer than drywall, so we often use injection drying and extended dehumidification rather than full demolition. The goal is to save the wall when we can safely do so. That said, if plaster is saturated and crumbling, removing affected sections is the only way to get the moisture out and prevent mold from returning.
Crawl Space Treatment
Many West Point homes sit over dirt crawl spaces that were never properly encapsulated. Mold in those spaces sends spores up through floor gaps and into living areas. We treat the framing, install vapor barriers where needed, and set up drying equipment sized for that specific square footage and soil condition. The price is set before we start, and you’ll see photos of the finished work.
Trusted Brands We Service in West Point
We run Dri-Eaz dehumidifiers, Phoenix air movers, and XPOWER filtration units on West Point jobs because they’re the same brands used on large commercial loss sites. That matters in older homes where drying needs to be precise and documented. Our crews keep a ready stock of replacement parts and filters, so if a unit needs a swap mid-job, we don’t wait on a supply house. Fast turnaround keeps your containment time shorter, and that keeps your final cost lower. We also use B-Air and Injectidry systems for specific drying scenarios like hardwood floor cavities and tight wall spaces.
Common Mold Remediation Problems We See in West Point Homes
- The surface-only treatment. A wall gets wiped with bleach or a hardware-store mold spray, looks fine for two weeks, and then the mold returns. In West Point’s plaster-over-lath and older drywall assemblies, water sits behind the finish. If the cavity isn’t opened and dried, the mold never actually left.
- No containment on “small” jobs. Even a small mold patch in an older West Point home with shared HVAC chases can send spores into neighboring rooms during cleaning. We put up containment on every job, no exceptions, because the alternative is re-cleaning rooms you already finished.
- Calling it dry by feel. Touching a wall and deciding it’s dry is how you trap moisture behind new drywall. We log moisture readings every day and only remove drying equipment when the numbers match a documented pre-loss baseline. You get the logs, not an opinion.
- Ignoring the crawl space. A musty smell that moves through a whole West Point house often comes from below, especially in homes built before vapor barriers were standard. Treating the living space while skipping the crawl space means the smell comes back within months.
Pricing for Mold Remediation in West Point, NY
A typical single-room mold remediation in West Point runs $1,800 to $4,200. A multi-room job with significant wall cavity work usually lands between $4,500 and $8,500. Full crawl space remediation with encapsulation in this area is commonly $4,000 to $9,000 depending on square footage and access. Black mold remediation, which requires full PPE, stricter containment, and more extensive material removal, typically starts at $2,500 and can reach $10,000 or more in older West Point homes where plaster walls and tight chases slow the work down.
What moves the number: how far moisture traveled behind walls (found via thermal imaging), whether plaster or drywall needs removal, crawl space involvement, and how many rooms need containment. You always get a written price before any work starts. Call (940) 466-4354 and we’ll schedule a walkthrough, write up the scope, and text you an invoice you can pay from the link. The number on the screen is the number you pay.
We Also Serve Cities Near West Point
Our crews regularly work across the surrounding area, so if you’re in New Windsor, Peekskill, Beacon, or Crompond, we can typically schedule mold remediation within one to two days of your call. For West Point homeowners specifically, check our dedicated Mold Remediation in West Point page for neighborhood-specific details. Same live-answer phone, same written pricing, same 365-Day Done Right Promise.
Serving West Point, NY - Our Local Coverage Area
We’re based in the West Point area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Mold Remediation in West Point
Mold can begin growing on wet drywall and wood within 24 to 48 hours, but in West Point’s older homes with plaster walls and high interior humidity, you might not see it for weeks because it’s growing inside the wall cavity first. That’s why we treat any water leak that soaked into walls as a potential mold job and run moisture mapping even when nothing is visible yet. Call (940) 466-4354 as soon as you know water got inside a wall; the sooner we map it, the less has to be cut out.
If mold has penetrated the drywall surface, the drywall has to come out. Surface mold on painted drywall can sometimes be treated in place, but mold that has grown into gypsum or paper backing cannot be fully cleaned. In West Point, where water tends to sit inside wall cavities before anyone sees surface staining, we usually find that the drywall behind the visible mold is contaminated and needs removal. We only demo what testing and moisture readings confirm is affected. Call us for an honest assessment, not an automatic gut job.
Yes, significantly. Plaster holds moisture longer than drywall and dries slower, but it’s also denser and can sometimes be saved with injection drying rather than full removal. The lath behind it, though, is wood and will absorb water and grow mold just like drywall would. We assess each plaster wall individually: if the plaster is intact and the lath is dry enough, we can often dry in place. If the lath is saturated and moldy, sections have to come out. This decision is made with moisture readings and thermal imaging, not guesswork.
We set up containment barriers around the work area and run HEPA-filtered negative air machines that pull air from the contained zone, filter it, and exhaust it outside. That creates negative pressure so spores can’t drift into clean rooms. In West Point’s older homes with connected HVAC chases, we also seal off any registers or returns inside the containment area. This is standard protocol on every job we do, from a single closet to a full basement.
You’ll get daily moisture readings logged against a documented pre-loss baseline, and we don’t remove drying equipment until the numbers show the wall cavities, framing, and air are back to normal range. You’ll also get before-and-after photos by text showing what was cut out, what was treated, and what the finished condition looks like. Our 365-Day Done Right Promise is in writing on every job: if it’s not done right, we make it right. Call (940) 466-4354 for a free estimate and we’ll walk you through exactly what the scope would be for your home.
Written by Blake Sorensen, Owner at Wendell Water Damage Restoration, serving West Point since 2006.